Heritage Hollow Series
Heritage Hollow Series
The Heritage Hollow is a hybrid, true hollow body electric Guitar. Its equal parts jazz box, rockabilly country picker and finely tuned rock n roll machine. A true archtop hollow body, the heritage hollow features a 3/4″ solid carved AA – AAA Flame maple top, solid carved mahogany back, with no center block aside from a small support block placed directly under the bridge. This fusion of traditional and modern design, coupled with a pair of Seymour Duncan Humbuckers, creates a range of unique warm, crisp tones, but with plenty of room for gain. This guitar features all gold hardware, ebony fingerboard, rectangular Mother of Pearl and Abalone anniversary fret inlays and 3 stripe body binding. The rich, versatile sound of the Heritage Hollow is incomparable and will have you covered no-matter what style of music you’re playing.
The Heritage Hollow is a hybrid, true hollow body electric Guitar. Its equal parts jazz box, rockabilly country picker and finely tuned rock n roll machine. A true archtop hollow body, the heritage hollow features a 3/4″ solid carved AA – AAA Flame maple top, solid carved mahogany back, with no center block aside from a small support block placed directly under the bridge. This fusion of traditional and modern design, coupled with a pair of Seymour Duncan Humbuckers, creates a range of unique warm, crisp tones, but with plenty of room for gain. This guitar features all gold hardware, ebony fingerboard, rectangular Mother of Pearl and Abalone anniversary fret inlays and 3 stripe body binding. The rich, versatile sound of the Heritage Hollow is incomparable and will have you covered no-matter what style of music you’re playing.
Specifications
Body: Mahogany back Top: Solid Carved AA-AAA Flame Maple Neck: Solid Mahogany, C shaped Scale: 24 3/4” Fingerboard: Ebony Frets: 22 Radius: 14” Nut: 1 11/16” TUSQ XL Nut Inlays: Mother of Pearl and Abalone Rectangle Width at first fret: 1.75” Neck Thickness at first fret: 0.83” Neck Width at 12th fret: 2” Neck Thickness at 12th fret: 0.90” |
Bridge Pickup: Seymour Duncan Humbucker - SH 1-59
Neck Pickup: Seymour Duncan Humbucker - SH 1-59 Bridge: TonePros Tuneomatic TPFP Bridge and Saddle Tuners: Grover 18:1 Hardware: Gold Finish: Sunburst or Trans Red Available left handed Upper Bout: 9.25” Waist: 7.25” Lower Bout: 13.25” Body Depth: 2 1/8th” – 2 ½” Contoured Average weight: 8 lbs |
Cory Churko Signature Model Guitar
The Cory Churko Signature is available left handed.
Cory Churko has enjoyed a multi-faceted in the music industry for over 30 years. His time working with Shania Twain, Kelly Clarkson and Reba McEntire and talents as an award winning guitarist, multi-instrumentalist, vocalist, mix engineer and digital editor are only some of the reasons why he is one of the most sought after and valued people in the entertainment industry. Cory’s behind the scenes credits are equally as impressive. As a mix engineer and programmer, he has worked side by side with such music production giants as Mutt Lange, Mike Shipley, Nigel Green, Ron Fair, Rob Cavallo, Mathew Wilder, John Fields and Ron Aniello.
The Cory Churko Signature Model is based on our Award-Winning Heritage Hollow Guitar, tweaked to perfectly fit Cory’s playing style and chosen aesthetic. This guitar is a true hollow body electric Guitar, but features a hand selected solid carved Bird’s Eye Maple Top and solid Mahogany back. There is no center block aside from a small support block placed directly under the bridge, which keeps this guitar on the lighter side, while just a single F-Hole moves this guitar into the rock n roll realm. Tonally, this modern twist on our classic design, coupled with a pair of Seymour Duncan ’59 Humbuckers, creates a range of unique warm, crisp tones, but with plenty of room for gain. The addition of a momentary kill-button, is a touch all Cory’s own and something he uses throughout his work. This guitar features all nickel hardware including Bigsby USA B5 Tailpiece, ebony fingerboard, staggered dot Mother of Pearl fret inlays with a Custom Cory Churko inlay at the 12th fret and 3 stripe white body binding.
Cory Churko has enjoyed a multi-faceted in the music industry for over 30 years. His time working with Shania Twain, Kelly Clarkson and Reba McEntire and talents as an award winning guitarist, multi-instrumentalist, vocalist, mix engineer and digital editor are only some of the reasons why he is one of the most sought after and valued people in the entertainment industry. Cory’s behind the scenes credits are equally as impressive. As a mix engineer and programmer, he has worked side by side with such music production giants as Mutt Lange, Mike Shipley, Nigel Green, Ron Fair, Rob Cavallo, Mathew Wilder, John Fields and Ron Aniello.
The Cory Churko Signature Model is based on our Award-Winning Heritage Hollow Guitar, tweaked to perfectly fit Cory’s playing style and chosen aesthetic. This guitar is a true hollow body electric Guitar, but features a hand selected solid carved Bird’s Eye Maple Top and solid Mahogany back. There is no center block aside from a small support block placed directly under the bridge, which keeps this guitar on the lighter side, while just a single F-Hole moves this guitar into the rock n roll realm. Tonally, this modern twist on our classic design, coupled with a pair of Seymour Duncan ’59 Humbuckers, creates a range of unique warm, crisp tones, but with plenty of room for gain. The addition of a momentary kill-button, is a touch all Cory’s own and something he uses throughout his work. This guitar features all nickel hardware including Bigsby USA B5 Tailpiece, ebony fingerboard, staggered dot Mother of Pearl fret inlays with a Custom Cory Churko inlay at the 12th fret and 3 stripe white body binding.
Specifications
Top: Solid, Carved AAA Grade Birds Eye Maple Body: Mahogany body Neck: Solid Mahogany, C shaped Scale: 24 3/4” Fingerboard: Ebony Radius: 14” Finish: Blue Burst Hardware: Nickel |
Nut: 1 11/16” TUSQ XL Nut
Inlays: Mother of Pearl offset dot fret markers with Custom 12th fret inlay Pickups: Seymour Duncan SH 1-59 Set Humbucker Electronics: Master Volume, Bridge Tone and Neck Tone controls, with momentary kill button. 3-way Toggle switch Tailpiece & Bridge: Bigsby B5 Tailpiece and TonePros roller saddles Tuners: Grover Sta-Tite 18:1 97-18 open geared tuner |
Musician Pro TR
Musician Pro Series
The Musician Pro TR is our premier thin line semi-hollow guitar. A single cutaway maple body, trans-red finish and gold US Bigsby B7 Vibrato are just the start. We use a unique chambered center block design in this model which cuts down the weight by leaving the balance of the body chamber open. Coupled with an arched top and back, this allows for more acoustic airspace resulting in more open tones. The 25 1⁄2” scale length gives this guitar a much tighter feel while allowing the strings to ring through and sustain much longer versus a traditional 24 3⁄4” scale guitar. The Pro TR features all gold hardware and a pair of Seymour Duncan Humbuckers to give you a complete tonal range along with all the bite and gain you can hope for.
The Musician Pro TR is our premier thin line semi-hollow guitar. A single cutaway maple body, trans-red finish and gold US Bigsby B7 Vibrato are just the start. We use a unique chambered center block design in this model which cuts down the weight by leaving the balance of the body chamber open. Coupled with an arched top and back, this allows for more acoustic airspace resulting in more open tones. The 25 1⁄2” scale length gives this guitar a much tighter feel while allowing the strings to ring through and sustain much longer versus a traditional 24 3⁄4” scale guitar. The Pro TR features all gold hardware and a pair of Seymour Duncan Humbuckers to give you a complete tonal range along with all the bite and gain you can hope for.
Specifications
Body: Thinline Semi Hollow Top: Arched Maple Back: Arched Maple Center Block: Chambered Neck: Solid Mahogany, C shaped Scale: 25 1/2” Fingerboard: Pau Ferro Frets: 20 Radius: 14” Width at first fret: 1.75” Neck Thickness at first fret: 0.85” Neck Width at 12th fret: 2” Neck Thickness at 12th fret: .95” |
Nut: 1 11/16” TUSQ XL Nut
Inlays: Mother of Pearl Rectangle Neck Pickup: Seymour Duncan Humbucker - SH 1-59 Bridge Pickup: Seymour Duncan Humbucker - SH4-JB Tailpiece: Bigsby USA B7 Vibrato Bridge: TonePros Tuneomatic TPFR Roller Saddle Tuners: Grover 18:1 Hardware: Gold Finish: Trans Red Upper Bout: 12”Waist: 9.75” Lower Bout: 16” Body Depth: 2” Average weight: 9 lbs |
Musician Pro DC
Musician Pro DC Series
The Musician Pro Double Cutaway is a hard tail, double cut version of our Musician Pro. A thin line semi-hollow, the “Pro DC” features a unique chambered center block design which cuts down the weight by leaving the balance of the body chamber open. Coupled with an arched top and back, this allows for more acoustic airspace resulting in more open tones. The 25 1⁄2” scale length gives this guitar a much tighter feel while allowing the strings to ring through and sustain much longer versus a traditional 24 3⁄4” scale guitar. The Pro DC features all chrome hardware including a pair of Seymour Duncan Humbuckers, to give you a complete tonal range but with all the bite and gain you can hope for.
The Musician Pro Double Cutaway is a hard tail, double cut version of our Musician Pro. A thin line semi-hollow, the “Pro DC” features a unique chambered center block design which cuts down the weight by leaving the balance of the body chamber open. Coupled with an arched top and back, this allows for more acoustic airspace resulting in more open tones. The 25 1⁄2” scale length gives this guitar a much tighter feel while allowing the strings to ring through and sustain much longer versus a traditional 24 3⁄4” scale guitar. The Pro DC features all chrome hardware including a pair of Seymour Duncan Humbuckers, to give you a complete tonal range but with all the bite and gain you can hope for.
Specifications
Body: Thinline Semi Hollow Top: Arched Maple Back: Arched Maple Center Block: Chambered Neck: Solid Mahogany, C shaped Scale: 25 1/2” Fingerboard: Pau Ferro Frets: 20 Radius: 14” Width at first fret: 1.75” Neck Thickness at first fret: 0.85” Neck Width at 12th fret: 2” Neck Thickness at 12th fret: .95” |
Nut: 1 11/16” TUSQ XL Nut
Inlays: Mother of Pearl Rectangle Neck Pickup: Seymour Duncan Humbucker - SH 1-59 Bridge Pickup: Seymour Duncan Humbucker - SH4-JB Bridge: TonePros Tuneomatic TPFP Bridge and Saddle Tuners: Grover 18:1 Hardware: Chrome Finish: Cherry Burst Upper Bout: 12” Waist: 9.75” Lower Bout: 16” Body Depth: 2” Average weight: 8.4 lbs |
NYS Deluxe
The NYS Deluxe is the hot-rodded, rockabilly big brother of the NYS Standard. Single cutaway, bound F-Holes, arched maple top and back, and a solid maple center block for increased sustain and reduced feedback. Piles of midrange punch in the NYS Deluxe allow you to cover anything in the rock spectrum without an ounce of trouble. Dial it back to let those warm, clear jazz and blues notes ring out. A pair of Seymour Duncan alnico P90’s enhance the vintage feel of this guitar. Smooth and glassy, while round and warm in the mids but with plenty of extra bite and snarl when you want it. The “Deluxe” comes in both metallic gold or metallic charcoal finish, TonePros Locking Bridge with Roller saddles, and a US Bigsby B7 vibrato. The NYS Deluxe is a dazzling, rock machine
Specifications
Body: Semi Hollow Top: Arched Maple Back: Arched Maple Center Block: Solid Neck: Solid Mahogany, C shaped Scale: 24 3/4” Fingerboard: Pau Ferro Frets: 20 Radius: 14” Width at first fret: 1.75” Neck Thickness at first fret: 0.85” Neck Width at 12th fret: 2” Neck Thickness at 12th fret: 1 |
Nut: 1 11/16” TUSQ XL Nut
Inlays: Mother of Pearl and Abalone Rectangle Neck Pickup: Seymour Duncan Vintage P90 (SP90-1N) Bridge Pickup: Seymour Duncan Vintage P90 (SP90-1B) Tailpiece: Bigsby USA B7 Vibrato Bridge: TonePros Tuneomatic TPFR Roller Saddle Tuners: Grover 18:1 Hardware: Gold Finish: Metallic Gold Upper Bout: 11.25” Waist: 9.25” Lower Bout: 15.5” Body Depth: 2” Average weight: 9.4 lbs |
NYS Standard
NYS Standard Series
The NYS Standard is a classic vintage style semi-hollow body guitar. Featuring an arched maple top and back, and a solid center block, the NYS allows you to coax an amazing amount of sustain out of each note. The 24 3⁄4” scale give this guitar a jazzy feel but don’t let that fool you. There is more than enough midrange punch in this design to confuse it with a solid body when called upon; and you’ll be able to cover anything in the rock spectrum without an ounce of trouble. A pair of Seymour Duncan alnico P90’s enhance the vintage tones of this guitar. Smooth and glassy, while round and warm in the mids; but with plenty of extra bite and snarl when you want it.
The NYS Standard is a classic vintage style semi-hollow body guitar. Featuring an arched maple top and back, and a solid center block, the NYS allows you to coax an amazing amount of sustain out of each note. The 24 3⁄4” scale give this guitar a jazzy feel but don’t let that fool you. There is more than enough midrange punch in this design to confuse it with a solid body when called upon; and you’ll be able to cover anything in the rock spectrum without an ounce of trouble. A pair of Seymour Duncan alnico P90’s enhance the vintage tones of this guitar. Smooth and glassy, while round and warm in the mids; but with plenty of extra bite and snarl when you want it.
Specifications
Body: Semi Hollow Top: Arched Maple Back: Arched Maple Center Block: Solid Neck: Solid Mahogany, C shaped Scale: 24 3/4” Fingerboard: Pau Ferro Frets: 20 Radius: 14” Width at first fret: 1.75” Neck Thickness at first fret: 0.85” Neck Width at 12th fret: 2” Neck Thickness at 12th fret: 1 |
Nut: 1 11/16” TUSQ XL Nut
Inlays: Mother of Pearl Dot Neck Pickup: Seymour Duncan Vintage P90 (SP90-1N) Bridge Pickup: Seymour Duncan Vintage P90 (SP90-1B) Bridge: TonePros Tuneomatic TPFP Bridge and Saddle Tuners: Grover 18:1 Hardware: Chrome Finish: Tobacco Sunburst Upper Bout: 11.25” Waist: 9.25” Lower Bout: 15.5” Body Depth: 2” Average weight: 8.4 lbs |